Titanium Powder for Thermal Spraying Description
Titanium spray coatings are typically supplied in the form of powder, wire, or rods. The powder is heated and converted into particles measured in micrometres. The particles are then accelerated towards the substrates, thereby forming a coating.
Titanium readily combines with other metals to form alloys. Thermal spray coatings produced using titanium powder are lightweight, exhibit satisfactory mechanical integrity, and show resistance to most corrosive substances.

Specifications for Titanium Powder for Thermal Spraying
Powder Type
|
CP-Ti
|
Particle Size (μm)
|
15-53
|
45-106
|
D50
|
31
|
60
|
Apparent Density (g/cm3)
|
2.32
|
2.33
|
Chemical Composition (%)
Grade
|
Particle Size
|
Chemical Composition
|
μm
|
Ti
|
Fe
|
O
|
C
|
N
|
H
|
CP-Ti
|
15-53
|
Bal.
|
≤0.08
|
≤0.17
|
≤0.03
|
≤0.03
|
≤0.01
|
45-105
|
Bal.
|
≤0.08
|
≤0.10
|
≤0.03
|
≤0.03
|
≤0.01
|
Titanium Powder for Thermal Spraying
Our titanium powder for thermal spraying is employed in various applications, including:
- Medical applications owing to its biocompatibility
- Coatings with porous structures for implants
- Corrosion-resistant coatings
- Use as an adhesion promoter for hydroxylapatite topcoats
Titanium Powder for Thermal Spraying Packaging
Our products are clearly labelled and identified to facilitate efficient quality control. Care is taken to prevent any damage during storage or transport.
Titanium Powder for Thermal Spraying Safety Instructions
Signal Word
|
Danger
|
Hazard Statements
|
H250
|
Hazard Codes
|
P210-P231-P280-P302 + P334-P370 + P378-P422
|
Precautionary Statements
|
P210-P280-P240-P241-P370+P378
|
Flash Point
|
Not applicable
|
Risk Codes
|
Not applicable
|
Additional Safety Information
|
N/A
|
RTECS Number
|
N/A
|
Transport Information
|
UN1383- Class 4.2 - PG 1 - Pyrophoric Metal, not otherwise specified, HI: all
|
WGK Germany
|
1
|
GHS Pictograms
|
 |