Discontinued IF5180 (Discontinued) 1200C 5-Side Heating Muffle Furnace KSL-1200X-5L-UL

Power

• Power: 12 kW
• Three-phase, AC380V/50Hz
• Other voltage ratings available upon request.
• A power cable with plug is included.

Heating Chamber

• Size: 20" x 20" x 20" (500 x 500 x 500 mm)
• Capacity: 125 Litres
• Uniform temperature zone: 200 x 200 x 200 mm +/- 2℃
• Heating element: Free-standing Ni-Cr-Al Wire
• Thermocouple: Type K
• Double-sided alloy casing with cooling fans.

Operating Temperature

• 1200 ℃ continuously without alloy chamber
• 1000℃ continuously with an alloy chamber
• Heating rate: 10℃/min
• Stability: +/- 1℃

Temperature Controller

• The temperature controller FA-YD518P-AG is included.
• Proportional-Integral-Derivative control (PID control) with auto-tune function
• 30 segments with ramp, cool, and dwell stages programmed
• Built-in over-temperature alarm and thermocouple failure alarm
• Temperature control accuracy +/- 1℃
• Standard RS485 PC communication interface
• Eurotherm temperature controller with +/- 0.1 accuracy is available for an additional charge

Refractory Alloy Chamber for Debinding (optional)

• Chamber made of 310SS alloy with a hinged door
• Size: 415 T x 372 L x 372 W (mm)
• Capacity: 57.4 Litres
• 12.7 mm OD gas inlet pipe located at the back of the furnace
• The gas outlet pipe with a 30 mm ID (40 mm OD) is connected at the top of the furnace
• Type K thermocouple is inserted into the inner chamber for temperature control
• Max. operating temperature: 1000℃
• An alumina fibre packing is installed as door sealing.

Product Dimensions

930×890×1480 mm (L×W×H)

Net Weight

330 kg

Warranty

• One-year limited warranty with lifetime support.
• WARNING: Damages caused by the use of corrosive and acidic gases are not covered under the one-year limited SAM warranty.

Compliance

• CE certified
• NRTL (UL61010) or CSA certification available upon request for an additional fee.