1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 Description
1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 is a high-temperature box furnace featuring silicon carbide bars as heating elements. The furnace has a double-shelled casing structure and a PID programmable temperature control with a type B thermocouple. The furnace chamber consists of high-purity alumina fibre material, allowing it to achieve a maximum temperature of 1700 degrees. It can operate continuously at a temperature of 1600 degrees, with a temperature control accuracy of ±1 degree. The advantages of this furnace include uniform temperature distribution, low surface temperature, and energy efficiency.
1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 Specifications
|
Furnace Structure
|
- Double-shelled steel casing with a cooling fan that maintains the casing temperature
- High-purity alumina fibre insulation for maximum energy savings
- A newly developed retention device ensures a safe working environment (please click on the left image for details)
|
|
Dimensions
|
- Chamber: 250 x 250 x 300 mm (10 x 10 x 12 inches), 19 litres
- Overall: 600 x 780 x 620 mm (24 x 31 x 24.5 inches)
|
|
Power
|
|
|
Voltage
|
- AC 208V-240V single-phase, 50/60 Hz (50A air breaker required)
- Note: The plug is not included. It is recommended to use a NEMA L5-30 / NEMA 10-30P plug for AC 110V and a NEMA 6-20P plug for AC 208~240V.)
|
|
Standard Operating Temperature
|
- 1600℃ or 2912℉ (continuously)
|
|
Maximum Operating Temperature
|
- 1700℃ (3092℉) in air < 3 hours
- 1650℃ (3002℉) in N2
- 1170℃ ~ 1450℃ (2138℉ ~ 2642℉) in H2
|
|
Heating Rate
|
- 0~10℃ / min (recommended = 5℃)
|
|
Temperature Accuracy
|
|
|
Temperature Uniformity
|
- +/- 5℃ over 120 mm (5") @ 1700℃
- +/- 2℃ over 80 mm (3") at 1700℃
|
|
Thermocouple
|
- B-Type (Pt-Rh to Pt-Rh) with alumina tube
|
|
Heating Elements
|
- MoSi2 quality Super 1800 (30 x 420 mm)
|
|
Temperature Controller
|
- Proportional-Integral-Derivative control (PID control) with auto-tune function
- 50 segments with ramp, cool, and hold stages programmed
- Built-in over-temperature alarm and thermocouple failure alarm
- Temperature control accuracy +/- 1℃
- Standard DB9 communication port for PC
- MET certified
|
|
Net Weight
|
|
|
Warranty
|
- One year limited warranty with lifetime support.
- WARNING: Damage caused by the use of corrosive and acid gases is not covered under the one-year limited SAM warranty.
|
|
Compliance
|
- CE/UL/CSA certified
- NRTL or CSA certification available upon request and at an additional cost.
|
|
Usage Notes
|
- To maintain the longevity of the furnace components, it is recommended that the heating rate does not exceed 10℃ /min.
- The cooling rate should also not exceed 10℃ /min.
- This furnace is not vacuum-sealed, and toxic or explosive gases should not be used without necessary safety measures and monitoring.
- With prolonged use, small cracks may develop on the surface of the refractory ceramic. This is a normal occurrence and the cracks can be repaired with an alumina coating.
- The refractory block must be installed before closing the door.
|
1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 Applications
The 1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 is an ideal device for annealing and sintering materials in research or dental laboratories.
1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 Packaging
Our 1700C Large Bench-Top High Temperature Muffle Furnace KAL-1700X-A3 is carefully handled during storage and transportation to maintain the quality of our product in its original state.
CUSTOMER REVIEWS
No reviews for current products.
Write for Us
Converters & Calculators
