CM9624 Piezoelectric Ceramic Disc PZT Disc Dia. 25 mm x 2 mm

Piezoelectric Ceramic Disc PZT Disc Dia. 25 mm x 2 mm Description

Piezoelectric Ceramic Disc PZT Disc Dia. 25 mm x 2 mm is fabricated from lead zirconate titanate (PZT) and exhibits a defined 25 mm diameter with a 2 mm thickness that facilitates integration with standard electronic mounting systems. The controlled sintering and optimised grain structure offer targeted piezoelectric responses in sensor and actuator applications. The ceramic composition ensures minimal porosity, supporting enhanced signal conversion in demanding operational environments.

Piezoelectric Ceramic Disc PZT Disc Dia. 25 mm x 2 mm Applications

Electronics
- Used as an actuator element in vibration sensors to achieve accurate signal transduction by leveraging controlled piezoelectric responses.
- Applied as a transducer in frequency converters to convert mechanical oscillations into electrical signals by utilising the ceramic’s electromechanical properties.

Industrial
- Employed in non-destructive testing equipment to detect structural anomalies by leveraging consistent piezoelectric behaviour.
- Implemented in ultrasonic cleaning devices to achieve efficient energy transmission by capitalising on the material’s stable mechanical characteristics.

Healthcare
- Utilised as a sensing component in diagnostic instruments to achieve precise data acquisition by using the ceramic’s consistent electrical output.

Piezoelectric Ceramic Disc PZT Disc Dia. 25 mm x 2 mm Packing

The discs are secured in anti-static, foam-lined containers to minimise mechanical shock and particulate contamination. Each unit is enclosed in sealed pouches within a moisture-controlled package to maintain ceramic stability. Storage instructions recommend a dry and temperature-regulated environment. Custom labelling and compartmentalised inserts are available to meet specific handling and transport requirements.

Frequently Asked Questions

Q1: How does the manufacturing process enhance the piezoelectric properties of the ceramic disc?
A1: The disc is produced using controlled sintering and SEM-based grain boundary assessments, which minimise microstructural variations. This careful process reduces internal stresses and ensures a consistent piezoelectric effect during operation.

Q2: What factors should be considered when integrating the disc into electronic assemblies?
A2: The disc’s 25 mm diameter and 2 mm thickness support common mounting techniques. It is advisable to use compatible adhesives and maintain thermal management to avoid stress-induced material changes during device operation.

Q3: Are there specific environmental conditions required for storing these ceramic discs?
A3: Yes, the discs should be stored in a temperature-controlled, dry environment to prevent moisture-induced microstructural degradation. Adhering to handling guidelines helps maintain the ceramically derived electromechanical properties.

Additional Information

Piezoelectric ceramics, notably those based on lead zirconate titanate (PZT), play a critical role in converting mechanical stress into electrical signals. The fabrication process involves precise sintering and microstructural control, which are essential to tailoring the material’s electromechanical characteristics.

Understanding the interplay between processing conditions and material properties is fundamental in applications ranging from sensors to actuators. Advances in ceramic processing techniques continue to refine these materials, making them indispensable in both industrial and research settings.