TM10123 Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm

Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm Description

Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm is manufactured from Ti-6Al-4V, the standard Grade 5 alloy, featuring a square cross-section of 8 mm by 8 mm. With a density of approximately 4.4 g/cm³ and a melting point near 1604℃, it provides the mechanical requirements for high-load environments. The bar’s tensile strength (≥895 MPa) and yield strength (≥120 MPa), complemented by a minimum elongation of 10%, ensure adequate performance in demanding fabrication processes.

Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm Characteristics

*The above product information is based on theoretical data and is for reference only. Actual specifications may vary.

Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm Applications

1.       Industrial Machinery
- Used as load-bearing components in machining frames to achieve dimensional stability by leveraging its high tensile and yield strength.

2.       Aerospace Components
- Applied as support elements in aircraft assemblies to achieve weight reduction by leveraging the alloy’s high strength-to-weight ratio.

3.       Automotive Systems
- Utilised as exhaust system components in performance vehicles to manage thermal stresses by leveraging the alloy’s high melting point and mechanical properties.

Titanium Alloy Bar, Ti Bar Grade 5, 8x8 mm Packing

Each bar is individually encased in moisture-resistant, antistatic packaging and secured within padded containers to protect against mechanical impacts. The packaging includes silica gel desiccants to maintain a controlled humidity environment. Clear labelling specifies storage conditions and handling instructions. Custom packaging solutions are available to meet specific logistical or transportation requirements.

Frequently Asked Questions

Q1: What quality control methods are implemented during production?
A1: The product undergoes ultrasonic flaw detection and spectroscopic analysis to ensure homogeneity of the alloy and detect internal defects. This systematic testing verifies that the material meets ASTM B348 standards before shipment.

Q2: How is consistency in mechanical properties maintained across batches?
A2: Consistency is achieved through standardised processing protocols and controlled heat treatment cycles. Regular in-house metallurgical testing ensures that properties such as tensile and yield strength remain within specified limits.

Q3: What are the recommended storage conditions for the titanium alloy bar?
A3: The bars should be stored in a dry environment at ambient temperature to prevent contamination and corrosion. Protective packaging and careful handling during storage further preserve the mechanical integrity of the material.

Additional Information

Titanium alloys, such as Ti-6Al-4V, are widely recognised for their excellent combination of low density and high strength. The controlled composition of these alloys results in predictable performance during high-temperature operations. Their use spans across various industrial applications due to their favourable strength-to-weight ratio and resistance to corrosion.

Scientific advancements in metallurgy have continuously refined the processing techniques for titanium alloys. Enhanced testing methodologies, including ultrasonic and spectroscopic analysis, have been integrated into production to monitor material consistency and performance. These measures ensure that components manufactured from titanium alloys perform optimally in demanding environments.