WM7644 Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm

Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm Description

Our Tungsten Rhenium Alloy Wire W-Re5, measuring 0.1 mm in diameter, combines tungsten’s high-temperature strength with rhenium’s enhanced ductility and electrical conductivity. Crafted according to ASTM E696 standards, this wire provides performance in demanding thermal environments, making it suitable for specialised applications in aerospace, defence, and medical industries. Its stable mechanical properties allow for reliable operation under extreme heat, while the rhenium content ensures improved tensile strength and resilience against corrosion and oxidation.

Additionally, the tight diameter tolerance of 0.1 mm facilitates precise usage in thermocouple components, heating elements, and other high-temperature equipment. Rigorously tested and verified, our W-Re5 alloy wire demonstrates consistent quality and reliability, ensuring it can be relied upon for critical applications where precision, endurance, and safety are paramount.

Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm Applications

This tungsten rhenium alloy wire W-Re5, featuring a 0.1 mm diameter, is commonly utilised in applications requiring high-temperature performance and corrosion resistance. By combining tungsten with rhenium, enhanced mechanical stability and improved ductility are achieved, making it a suitable choice for demanding environments. The following sections provide examples of its uses across various industries.

1. High-Temperature Measurement

·         Thermocouple Elements: Suitable for monitoring extreme heat levels in industrial furnaces and reactors

·         High-Vacuum Sensors: Durable under vacuum pressures, ensuring precise temperature readings

2. Medical and Research Tools

·         Advanced Medical Probes: Suitable for minimally invasive procedures requiring fine, stable wiring

·         Laboratory Instruments: Withstand high temperatures and chemical exposure for accurate data collection

3. Aerospace and Defence Components

·         Jet Engine Temperature Sensors: Provide reliable readings under intense thermal loads

·         Missile Guidance Equipment: Maintain stable conductivity even under rapid temperature fluctuations

Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm Packaging

Each spool of Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm, is carefully wound and wrapped in protective plastic film. The wire is then vacuum-sealed in a moisture-barrier bag to shield against humidity and potential corrosion. Additional anti-rust paper is included for extra security. Each packed spool is neatly placed in a sturdy cardboard box for safe transport. Customised packaging solutions are available to meet specific shipping or storage needs.

Packaging: Vacuum sealed, Wooden Box, or Customised.

Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm FAQs

Q1: What are the key material properties of Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm?

A1: Tungsten Rhenium Alloy Wire W-Re5 is composed of approximately 95% tungsten and 5% rhenium, which provides high-temperature strength, ductility, and chemical stability. The addition of rhenium enhances tensile strength and creep resistance, making it suitable for demanding applications. With a high melting point (over 3,000°C), low coefficient of thermal expansion, and good electric conductivity, this wire is often used in aerospace, electronics, and thermocouple sensor components.

Q2: How can this tungsten rhenium alloy wire be processed or fabricated?

A2: Fabrication typically involves careful wire drawing, rolling, and annealing to achieve a precise diameter of 0.1 mm. The alloy’s ductility allows it to be drawn into fine wires without significant brittleness. Vacuum or hydrogen heat treatment is often used to remove impurities and stress. Advanced machining and laser cutting techniques may be employed when incorporating the wire into specialised assemblies, such as sensor leads or heater elements.

Q3: Which quality standards and certifications apply to Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm?

A3: Commonly, production facilities adhere to ISO 9001 or AS9100 quality management systems, ensuring consistent material integrity. Certifications such as ASTM B760 or ASTM F288 for refractory materials may be relevant, depending on the final application. Traceability of wire batches and compliance with RoHS or REACH regulations may also be required. Rigorous in-house testing, including dimensional checks and mechanical tests, ensures the wire meets rigid aerospace and electronic industry standards.

Related Information

1. Material Properties and Advantages

Tungsten Rhenium Alloy Wire W-Re5, with a diameter of 0.1 mm, stands out for its high-temperature performance and stability. Known for its tensile strength, this grade maintains structure in demanding thermal environments. The composition of tungsten with a 5% rhenium content enhances ductility, making it suitable for applications in precision instruments and advanced electronic devices.

Prolonged exposure to intense heat does not compromise the wire’s mechanical properties, which is an advantage in fields such as aerospace and medical device manufacturing. Moreover, the W-Re5 formulation reduces the risk of embrittlement, offering a longer service life compared to alternative grades of tungsten-based wires.

2. Quality Control Measures

Quality audits are conducted at every key stage of production to ensure that each Tungsten Rhenium Alloy Wire W-Re5, Dia. 0.1 mm meets the criteria demanded by modern industries. Checks for dimensional precision, chemical composition, and surface uniformity help guarantee consistent performance in a range of applications.

Testing under high-temperature stress simulations confirms that the W-Re5 composition can withstand extreme operating conditions. By using analytical tools, producers verify that each wire exhibits the required metallurgical consistency, reinforcing the product’s reliability for critical end-user applications.