Discontinued MF5876 (Discontinued) 1500C 4 Channel Tube Furnace GSL-1500X-MGI-4

Furnace Construction

• Consists of four small box furnaces.
• Each module is independently temperature controlled, with a maximum temperature of 1500℃.
• Can accommodate four samples for thermal treatment at different temperatures simultaneously.
• High-purity alumina fibre chamber, coated with an alumina layer to enhance heating efficiency and extend service life.
• Double-walled structure with an integrated air cooling system for surface cooling.

Heating Element

MoSi2

Power

12 kW, AC208-240V, single-phase, 50/60Hz

Processing Tube

• High-purity alumina tube with Ø50X L 460 mm, 4 tubes included.
• 4 flow meters are included.
• Quick clamp flange of KF25 with mechanical vacuum gauge and needle valves.
• Max. vacuum 10^-5 Torr via a turbo pump.
• Only one vacuum pump required via a KF25 connection.

Operating Temperature

• Max. temperature: 1400℃ (continuous); 1500℃ (<1 hour).
• Heating rate: ≤10℃/min.
• Temperature accuracy: ±0.5℃.

Temperature Control

• Programmable temperature controller of the Eurotherm 3000 series.
• Includes over-temperature and interruption warning for thermal coupling.
• 4-channel heating tube is regulated independently by 24 programmable temperature controllers.
• 4 S-type thermocouples.
• With RS485 communication interface and PC control software to monitor and record the temperature of all 4-channel heaters via a laptop.

Dimensions

800 L x 680 W x 1000 H mm

Warranty

• One year limited warranty with lifetime support.
• We reserve the right to improve the oven's structure for better performance without prior notice.

Warnings & Notices

The maximum pressure of this furnace is 7.5 PSI (0.5 atm). You must install a pressure regulator on your gas tank to avoid overpressure.

Certificate

• CE certified.
• One NRTL or CSA certification available at an additional cost.