SECTION 1. IDENTIFICATION
Product Name: Nickel Carbonyl
CAS #: 13463-39-3
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
E-mail: sales@samaterials.com
Tel: (949) 407-8904
Address: 23661 Birtcher Dr., Lake Forest, CA 92630 U.S.A.
SECTION 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS02 Flame
Flam. Liq. 1 H224 Extremely flammable liquid and vapor.
GHS06 Skull and crossbones
Acute Tox. 1 H330 Fatal if inhaled.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 1B H360 May damage fertility or the unborn child.
Label elements
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02 GHS06 GHS08
Signal word Danger
Hazard-determining components of labeling:
tEtracarbonylnickel
Hazard statementsH224 Extremely flammable liquid and vapor.
H330 Fatal if inhaled.
H351 Suspected of causing cancer.
H360 May damage fertility or the unborn child.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P422 Store contents under inert gas.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Classification system:
NFPA ratings (scale 0 - 4)
Health = 4
Fire = 3
Reactivity = 0
HMIS-ratings (scale 0 - 4)
Health = *4
Fire = 3
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterization: Substances
CAS No. Description
13463-39-3 Tetracarbonylnickel
Identification number(s)
Index number: 028-001-00-1
SECTION 4. FIRST AID MEASURES
Description of first aid measures
General information:
Immediately remove any clothing soiled by the product.
Remove breathing apparatus only after contaminated clothing have been completely removed.
In case of irregular breathing or respiratory arrest provide artificial respiration.
After inhalation:
Supply fresh air or oxygen; call for doctor.
In case of unconsciousness place patient stably in side position for transportation.
After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed No further relevant information
available.Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Special hazards arising from the substance or mixture
During heating or in case of fire poisonous gases are produced.
Advice for firefighters
Protective equipment: Mouth respiratory protective device.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Mount respiratory protective device.
Wear protective equipment. Keep unprotected persons away.
Environmental precautions:
Do not allow product to reach sewage system or any water course.
Prevent seepage into sewage system, workpits and cellars.
Inform respective authorities in case of seepage into water course or sewage system.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
SECTION 7. HANDLING AND STORAGE
Handling:
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Only handle and refill product in closed systems.
Prevent formation of aerosols.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Keep respiratory protective device available.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Keep receptacle tightly sealed.Do not gas tight seal receptacle.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.
Specific end use(s) No further relevant information available.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Additional information about design of technical systems: No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:
13463-39-3 tetracarbonylnickel
PEL Long-term value: 0.007 mg/m³, 0.001 ppm
REL Long-term value: 0.007 mg/m³, 0.001 ppm
See Pocket Guide App. A
TLV Ceiling limit value: 0.12 mg/m³, 0.05 ppm as Ni
Additional information: The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer
exposure use
respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and
has to be
observed.
Eye protection:
Tightly sealed goggles
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
General InformationAppearance:
Form: Liquid
Color: Colorless
Odor: Acrid
Odor threshold: Not determined.
pH-value: Not determined.
Change in condition
Melting point/Melting range: -19.3 °C (-3 °F)
Boiling point/Boiling range: 43 °C (109 °F)
Flash point: Not applicable.
Flammability (solid, gaseous): Not applicable.
Ignition temperature: 60 °C (140 °F)
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Not determined.
Explosion limits:
Lower: 2 Vol %
Upper: 34 Vol %
Vapor pressure at 20 °C (68 °F): 480mm (30 hPa (360mm (23 mm Hg)
Density at 20 °C (68 °F): 1.32 g/cm³ (11.015 lbs/gal)
Relative density Not determined.
Vapor density Not determined.
Evaporation rate Not determined.
Solubility in / Miscibility with
Water at 20 °C (68 °F): 0.18 g/l
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Other information No further relevant information available.
SECTION 10. STABILITY AND REACTIVITY
Reactivity No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to
specifications.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.
SECTION 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity:
LD/LC50 values that are relevant for classification:
Inhalative LC50/4 h 67 mg/l (mouse)Primary irritant effect:
on the skin: No irritant effect.
on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological information:
Carcinogenic categories
IARC (International Agency for Research on Cancer)
13463-39-3 tetracarbonylnickel 1
NTP (National Toxicology Program)
13463-39-3 tetracarbonylnickel K
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.
SECTION 12. ECOLOGICAL INFORMATION
Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Additional ecological information:
General notes: Not known to be hazardous to water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
SECTION 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage
system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
SECTION 14. TRANSPORT INFORMATION
UN-Number
DOT, IMDG, IATA UN1259
UN proper shipping name
DOT, IATA Nickel carbonyl
IMDG NICKEL CARBONYL, MARINE POLLUTANT
Transport hazard class(es)
DOT
Class 6.1 Toxic substances
Label 6.1, 3
IMDG
Class 6.1 Toxic substancesLabel 6.1/3
IATA
Class 6.1 Toxic substances
Label 6.1 (3)
Packing group
DOT, IMDG, IATA I
Environmental hazards:
Marine pollutant: Yes
Symbol (fish and tree)
Special precautions for user Not applicable.
Poison inhalation hazard: Yes
Danger code (Kemler): 663
EMS Number: F-E,S-D
Stowage Category D
Stowage Code SW2 Clear of living quarters.
Segregation Code SG63 Stow "separated longitudinally by an intervening complete
compartment or hold from" Class 1.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
Transport/Additional information:
DOT
Quantity limitations On passenger aircraft/rail: Forbidden
On cargo aircraft only: Forbidden
Hazardous substance: 10 lbs, 4.54 kg
IMDG
Limited quantities (LQ) 0
Excepted quantities (EQ) Code: E5
Maximum net quantity per inner packaging: 1 ml
Maximum net quantity per outer packaging: 300 ml
UN "Model Regulation": UN 1259 NICKEL CARBONYL, 6.1 (3), I
SECTION 15. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is listed.
Section 313 (Specific toxic chemical listings):
Substance is listed.
TSCA (Toxic Substances Control Act):
Substance is listed.
Proposition 65
Chemicals known to cause cancer:
Substance is listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
13463-39-3 tetracarbonylnickel B2TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is listed.
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02 GHS06 GHS08
Signal word Danger
Hazard-determining components of labeling:
tetracarbonylnickel
Hazard statements
H224 Extremely flammable liquid and vapor.
H330 Fatal if inhaled.
H351 Suspected of causing cancer.
H360 May damage fertility or the unborn child.
Precautionary statements
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P422 Store contents under inert gas.
P403+P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16. OTHER INFORMATION
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
Converters & Calculators
