TS1378 comprises aluminium oxide powder with 13% titanium oxide. It is used for thermal spraying.

Aluminium Oxide 13% Titanium Oxide for Thermal Spraying Description

Aluminium Oxide 13% Titanium Oxide for Thermal Spraying is a coating material that combines aluminium oxide (Al2O3) with titanium oxide (TiO2) in a defined composition. This composition is intended for use in thermal spraying processes, whereby a protective layer is applied to a substrate through the application of heat. It is used in the production of coatings that exhibit high toughness, low hardness, penetration resistance and a comparatively low resistance to chemical attack.

Aluminium Oxide 13% Titanium Oxide for Thermal Spraying Specifications

Aluminium Oxide 13% Titanium Oxide for Thermal Spraying Advantages

- Resistant to abrasion, sliding wear, oxidation, acids and alkalis
- Titanium oxide increases toughness but reduces hardness
- Increased DE and a consistent layer structure
- Applicable at temperatures up to 540 °C (1 000 °F)

Aluminium Oxide 13% Titanium Oxide for Thermal Spraying Applications

1. Surface Protection: Coatings are produced for surfaces that are subject to elevated temperatures and mechanical loads.

2. Corrosion Resistance: The material provides corrosion protection in industrial environments.

3. Abrasion Resistance: The coating enhances resistance against abrasive wear in machinery and equipment components.

4. Thermal Barrier Coatings: It is utilised in the aerospace sector and in gas turbine engines to provide thermal insulation and meet performance requirements.

5. Industrial Applications: The material is applied in various industrial sectors to extend the service life of components operating under rigorous conditions.

13% Aluminium Oxide–Titanium Oxide for Thermally Sprayed Packaging

Our Aluminium Oxide 13% Titanium Oxide for Thermal Spraying is externally marked and labelled to enable effective identification and quality control. Measures have been taken to prevent damage during storage or transport.