CM4061 Transparent Spinel Customized Part

Transparent Spinel Custom Part Descriptions:

Transparent Spinel (transparent magnesium-aluminium ceramic) has various applications in optics, electronics, and structural design.

Transparent spinel can be used to manufacture windows and lenses in the visible to mid-infrared range. The theoretical transmission of 3-5 µm is 87%, which approaches that of ALON and sapphire, with the cutoff wavelength being slightly longer than both, particularly beneficial for the performance of imaging systems in the mid-infrared range.

The properties of transparent ceramic spinel and aluminium oxide are comparable. It is suitable for various circuit components such as thick film circuits, thin film circuits, substrates for integrated circuits, and chip packaging, as well as other high-performance substrate materials.

Transparent Spinel - Custom Part Specifications:

Transparent Spinel Custom Part Properties:

Transparent Spinel has the following advantages:

- No scratches under harsh conditions;

- The thickness can be reduced by over 60% while maintaining the same protection requirements, effectively decreasing weight;

- The protective performance can be enhanced while maintaining the same thickness.

Consequently, it can be used in various high-temperature, high-pressure, and corrosive environments for device observation windows, gas detector windows, high-temperature boiler water level indicators, observation windows for high-temperature and high-pressure equipment, commercial barcode scanner windows, downhole detection sensors, low-voltage and high-frequency capacitors, and various types of protective eyewear.

Transparent Spinel - Custom Parts Applications:

- Various transparent seat, high-temperature, and corrosion-resistant fluid nozzle applications;

- High-pressure gas discharge lamp enclosures.

Transparent Spinel Custom Part Packaging:

SAM's Transparent Spinel Custom Part is treated carefully to minimise damage during storage and transport, preserving the quality of our products in their original condition.

Transparent Spinel - Custom Parts FAQs

Q1. What is a custom part made from transparent spinel?

A custom part made from transparent spinel is a component made of magnesium aluminate spinel (MgAl₂O₄) that is tailored to specific shapes, sizes, and specifications required for unique applications. Spinel is valued for its exceptional optical clarity, hardness, and durability.

Q2. What precautions should be taken when using custom parts made from transparent spinel?

Handling: Exercise caution to avoid mechanical damage. Use gloves to prevent contamination.

Cleaning: Avoid abrasive cleaners and materials that could scratch the surface.

Installation: Ensure proper fastening and support to prevent stresses and possible cracking. Q3. Can custom parts made from transparent spinel be coated or treated for specific applications?

Yes, custom parts made from transparent spinel can be coated or treated with various optical coatings to enhance performance for specific applications. Anti-reflective coatings, hard coatings, and other specialised treatments can be applied to improve optical performance and durability.