CY9394 PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol%

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol% Description

Engineered to deliver effective performance in a wide range of advanced electronics and sensing systems, the PIN-PMN-PT Single Crystal Substrate (001) offers exceptional piezoelectric, dielectric, and ferroelectric properties. With a carefully controlled 28–30 mol% doping ratio, this 10×10×0.5 mm substrate ensures enhanced electromechanical coupling, higher bandwidth, and greater energy conversion efficiency. Its oriented crystal structure provides precision and stability, making it a choice for high-performance actuators, sensors, and transducers.

Each substrate undergoes quality assurance measures, from production to final inspection, ensuring tight thickness tolerances and defect-free surfaces. This commitment to quality ensures consistent repeatability and reliable results in research and commercial applications. Discover the difference that quality single-crystal substrates can make in optimising device performance while meeting the highest industry standards for quality and reliability.

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol% Applications

PIN-PMN-PT Single Crystal Substrates (001) at 28-30 mol% are noted for their piezoelectric and ferroelectric qualities. Delivering high electromechanical coupling and low dielectric losses in a compact 10x10x0.5 mm format, they are ideally suited for precise sensing and actuation. This composition ensures stability, supporting industrial processes, research, and commercial products that demand performance and reliability.

1. Industrial Applications

·         Robotic sensors for precise motion control in automated assembly lines

·         Ultrasonic transducers used in non-destructive testing for defect detection

·         Automotive actuator components for engine and suspension management

2. Research Applications

·         Materials characterisation for exploring piezoelectric and ferroelectric effects

·         Development of measurement instruments in fundamental physics studies

·         Prototype testing of sensor designs to optimise sensitivity and signal clarity

3. Commercial Applications

·         Miniaturised consumer electronics requiring compact and efficient piezoelectric elements

·         Medical imaging technologies employing scanning transducers

·         Telecommunication devices leveraging frequency control for transmission quality

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol% Packaging

Each PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm (28-30 mol%) is sealed in an anti-static pouch with a foam cushion to guard against mechanical impact. For preservation, store in a clean, dry environment at constant temperature to prevent humidity-induced contamination. Each substrate is packaged in a dust-free facility. Packaging, labelling, or multiple-unit trays are available upon request to meet specific requirements.

Packaging: Vacuum sealed, Wooden Box, or Customised.

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol% FAQs

Q1: What are the key material properties of PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol%?

A1: The Single Crystal Substrate (001) 10x10x0.5 mm PIN-PMN-PT, with 28-30 mol% composition, is known for its piezoelectric performance, high dielectric constant, and low dielectric loss. Its single-crystal structure promotes consistent domain orientation, leading to electromechanical coupling and stability. The substrate’s compositional precision ensures repeatable thermal and mechanical behaviour, making it suitable for precision actuators, sensors, and other specialised applications.

Q2: How should this product be handled and stored?

A2: Handling requires clean, lint-free gloves to prevent contamination and potential mechanical damage. The substrate’s brittle nature requires minimal physical pressure, especially near edges. Store in a protective container within a controlled environment, keeping humidity low and temperature stable. Avoid direct contact with harsh chemicals or abrasives. Periodic inspection is recommended to detect any signs of contamination or microcracks.

Q3: Which quality standards and certifications apply to PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 28-30 mol%?

A3: PIN-PMN-PT Single Crystal Substrates for civilian, commercial, and industrial use typically align with ISO 9001 for quality management and may also comply with ISO 14001 for environmental stewardship. Manufacturers often follow Good Manufacturing Practices (GMP) to ensure product integrity and traceability. These substrates can also meet RoHS and REACH directives, limiting hazardous substances and ensuring responsible sourcing, thereby upholding technical and ethical standards across global markets.

Related Information

1. Material Properties and Advantages

Featuring a specialised 28-30 mol% composition, the PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm demonstrates piezoelectric response and dielectric constants. This distinct crystal orientation enhances energy conversion efficiency, making it a choice for sensing and actuation components. Its temperature stability ensures performance in commercial applications, from acoustic wave devices to medical imaging systems.

Utilising a finely tuned lattice structure, the substrate offers electromechanical coupling coefficients that can surpass those of conventional piezoelectric ceramics. Its homogeneous crystal arrangement reduces internal stress points, increasing both durability and operational reliability. These advantages provide prolonged service life for sensors, transducers, and other precision instruments, ultimately helping manufacturers reduce maintenance costs and improve product performance.

2. Research and Development

Analysing emerging design requirements in fields such as microelectronics and automated manufacturing, researchers focus on optimising the PIN-PMN-PT Single Crystal Substrate for commercial products. Efforts include refining growth processes to enhance crystal uniformity while minimising defects, thereby unlocking higher levels of output efficiency in specialised sensor arrays and actuators. By incorporating this substrate into prototyping cycles, development teams strive to reduce device footprint and improve overall system reliability.

Investigations continue to expand the substrate’s potential for applications that require motion control and vibration damping. In laboratory settings, engineers evaluate domain engineering techniques to leverage the substrate’s piezoelectric coefficients for device designs. Such initiatives highlight the importance of research, underscoring how this single crystal substrate can address performance needs across civilian and industrial market sectors.