CY9395 PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol%

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol% Description

Our PIN-PMN-PT Single Crystal Substrate (001), measuring 10 × 10 × 0.5 mm with a composition of 30–34 mol%, is engineered for precision applications. Its electromechanical coupling and high dielectric constant deliver performance in piezoelectric devices, sensors, actuators, and ultrasound transducers. The (001) orientation enhances its crystalline alignment, ensuring consistent properties across various operating conditions.

Each substrate undergoes quality assurance protocols to meet industry standards. Our inspection process verifies crystal purity, uniform density, and stable mechanical behaviour, assuring repeatability for both research and commercial applications. Integrating this substrate into projects provides notable accuracy, durability, and consistency, reflecting our commitment to delivering advanced materials.

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol% Applications

PIN-PMN-PT Single Crystal Substrate (001) 10 × 10 × 0.5 mm 30-34 mol% offers piezoelectric and electromechanical coupling properties, making it suitable for sensing and actuation. Its performance supports energy conversion, signal generation, and minimal energy loss. This substrate’s stability and responsiveness enable various industries to benefit from its reliable operation.

1. Industrial Applications

·         Precision sensors for automated manufacturing equipment, improving quality control and production consistency.

·         High-performance actuators in robotics, enabling precise motion and positioning for assembly lines.

2. Research Applications

·         Piezoelectric test platforms in materials science, facilitating accurate measurement of crystal behaviour under diverse conditions.

·         Advanced ultrasonic transducers in non-destructive testing, ensuring resolution and sensitivity for experimental studies.

3. Commercial Applications

·         Enhanced transducer elements in consumer medical devices, ensuring diagnostics accuracy.

·         Optimum energy harvesting components in wearable electronics, allowing power conversion and extended device runtime.

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol% Packaging

Each PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol% is sealed in a clean, vacuum-resistant pouch with ESD-safe materials. The samples are placed in a foam-lined protective container to prevent mechanical stress and minimise contamination. They should be stored in a dry, dust-free environment. Custom packaging configurations are available to meet special handling specifications.

Packaging: Vacuum sealed, Wooden Box, or Customised.

PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol% FAQs

Q1: What are the key material properties of PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol%?

A1: This PIN-PMN-PT (Pb(In1/2Nb1/2)-Pb(Mg1/2Nb1/2)-PbTiO3) single crystal substrate is oriented along the (001) crystallographic plane, delivering piezoelectric and ferroelectric properties. The 30-34 mol% composition ratio maximises dielectric permittivity, electromechanical coupling, and low dielectric loss, making it suitable for high-precision sensor, actuator, and transducer applications. It also provides thermal stability, chemical inertness, and consistent lattice parameters for thin-film deposition.

Q2: How should this product be handled and stored?

A2: Because these single crystal substrates are brittle and sensitive to contamination, they should be handled with nitrile or latex gloves to prevent oils or debris on the surface. Avoid applying excessive force or bending, as fractures can occur. Store them in protective containers, ideally with padding, to prevent chipping or scratching. Maintain a stable, dry environment, limiting humidity or temperature fluctuations.

Q3: Which quality standards and certifications apply to PIN-PMN-PT Single Crystal Substrate (001) 10x10x0.5 mm 30-34 mol%?

A3: These substrates typically conform to industry standards for crystalline materials, including thickness tolerance, surface roughness, and orientation verification. Manufacturers often adhere to ISO 9001 or similar quality management systems to ensure performance and repeatability. Compliance with environmental and safety regulations, such as RoHS, may also apply.

Related Information

1. Material Properties and Advantages

Featuring a (001) crystallographic structure, the PIN-PMN-PT Single Crystal Substrate (10x10x0.5 mm, 30-34 mol%) offers electromechanical characteristics optimised for performance applications. The compositional blend of lead indium niobate (PIN), lead magnesium niobate (PMN), and lead titanate (PT) ensures piezoelectric coefficients and mechanical stability, leading to accurate signal transduction. These properties allow the substrate to deliver responses in environments where measurements and feedback are critical.

Engineered with a high degree of crystalline purity, this PIN-PMN-PT substrate provides dielectric loss reduction and coupling, making it suitable for commercial systems requiring energy dissipation minimisation. Its thickness of 0.5 mm contributes to structural integrity and ease of integration into compact devices, while the controlled 30-34 mol% composition range ensures consistent performance. This quality and repeatability emphasise its value to manufacturers seeking reliability in electronic, sensing, and acoustical equipment.

2. Applications in Advanced Industries

Leveraging its piezoelectric capabilities, the PIN-PMN-PT Single Crystal Substrate is selected for sensor arrays, actuators, and medical imaging devices. Its high sensitivity and response contribute to commercial fields, including non-destructive testing equipment and ultrasound systems. The electromechanical coupling supports integrated designs where speed, accuracy, and miniaturisation are crucial in automation and diagnostics.

This substrate plays a vital role in electronics for robotics and microelectromechanical systems (MEMS). The stable electromechanical behaviour enables possibilities in instrumentation and energy harvesting applications benefiting from mechanical-to-electrical conversion. Dependability and operational attributes help position this PIN-PMN-PT Single Crystal Substrate in various commercial markets.