CY9397 PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol%

PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol% Description

The PIN-PMN-PT Single Crystal Substrate (110) measuring 10 × 10 × 0.5 mm and doped at 30–34 mol% provides exceptional electromechanical properties and a high dielectric constant, making it a suitable choice for advanced piezoelectric applications. Its unique crystal structure, comprising Pb(In1/2Nb1/2)O3 (PIN), Pb(Mg1/3Nb2/3)O3 (PMN), and PbTiO3 (PT), results in enhanced energy conversion efficiency and stable temperature performance.

Engineered under stringent quality control, this substrate undergoes strict inspections and polishings to ensure minimal surface defects and optimal crystal uniformity. It performs well in precision devices such as ultrasonic transducers, sensors, and actuators, providing consistent and reliable results across demanding research and industrial environments. With its excellent mechanical strength, high Curie temperature, and consistent crystallographic orientation, this substrate ensures both durability and high-level performance.

PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol% Applications

The PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol% provides a unique combination of high piezoelectric response and low dielectric losses, making it suitable for advanced sensing and actuation technologies. Its stability across a broad temperature range ensures consistent performance in demanding environments. These substrates enable effective energy transmission, allowing precise control and reliable operation in various industrial, research, and commercial applications.

1. Industrial Applications

·         Precision Sensors: Utilise the crystal’s high sensitivity and consistent response for accurate pressure or flow measurement in chemical and petrochemical processing.

·         Quality Control Equipment: Enhance detection capabilities for automated inspection systems in automotive manufacturing.

2. Research Applications

·         Advanced Materials Studies: Explore the crystal’s piezoelectric properties for novel device prototypes in academic and industrial R&D.

·         Sensor Calibration: Use the substrate as a reference standard in laboratories for accurate and repeatable calibration tests.

3. Commercial Applications

·         Medical Imaging Devices: Improve transducer performance and clarity for ultrasound and other diagnostic equipment.

·         Consumer Electronics: Enhance the precision of actuators and sensors in devices such as smartphones and wearables.

PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol% Packaging

Each PIN-PMN-PT Single Crystal Substrate (110) is carefully wrapped in ESD-safe foam, sealed in a moisture-resistant pouch, and placed in a sturdy, labelled container. It is recommended to store the substrate in a clean, temperature-controlled environment with minimal humidity. Our packaging prevents contamination through airtight sealing and antistatic materials. Custom packaging options, such as double vacuum sealing or nitrogen-purged containers, are available to meet specific research and application requirements.

Packaging: Vacuum sealed, Wooden Box, or Customised.

PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol% FAQs

Q1: What are the key material properties of PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol%?

A1: This PIN-PMN-PT single crystal substrate (110) with a 30–34 mol% composition provides a high dielectric constant, significant electromechanical coupling, and excellent ferroelectric properties for stable performance across a range of frequencies. Its well-aligned orientation ensures uniform polarisation, making it suitable for sensitive transducers, precision sensors, and actuators. The 0.5 mm thickness and consistent crystal integrity contribute to reliable mechanical strength and low dielectric losses.

Q2: How should this product be handled and stored?

A2: For optimum handling, always wear cleanroom gloves to avoid contamination and fingerprint marks. The substrate’s brittle nature necessitates careful placement and secure storage in padded containers. Maintain a controlled environment with low humidity and moderate temperature to preserve crystal quality. When cleaning, use non-abrasive solvents with gentle wiping to prevent scratches. Periodic inspections and careful handling ensure consistent performance and reduce the risk of fractures.

Q3: Which quality standards and certifications apply to PIN-PMN-PT Single Crystal Substrate (110) 10x10x0.5 mm 30-34 mol%?

A3: Manufacturers typically produce this substrate according to ISO 9001 standards for rigorous quality management and consistent process control. It is also commonly tested under internationally recognised guidelines to ensure reliable electrical and mechanical behaviour. The substrate may carry RoHS or REACH compliance certifications to confirm adherence to environmental and safety regulations. Full traceability is generally provided, enabling transparent documentation from crystal growth to final inspection.

Related Information

1. Material Properties and Advantages

Pin-PMN-PT single crystal substrate (110) 10x10x0.5 mm 30-34 mol% is noted for its substantial piezoelectric properties and high dielectric constants, making it a suitable choice for precision sensor applications. Prepared through a stringent crystal growth process, these substrates consist of a high-quality perovskite structure that promotes effective electromechanical coupling, enabling enhanced signal sensitivity and energy conversion efficiency in a range of civilian and industrial devices.

Thanks to its tuned composition, the substrate displays superior electromechanical performance across varying temperatures and frequencies. This reliability allows designers to integrate the crystal into systems that demand both consistency and longevity, ensuring stable output and reduced power consumption over extended operational cycles.

2. Applications in Advanced Industries

Demonstrating exceptional ferroelectric responses, the PIN-PMN-PT (110) substrate is widely utilised in ultrasonic transducers, precision micro-actuators, and medical imaging sensors. Its balanced composition supports effective vibration control, enabling sharper resolution in imaging systems and more precise placements in industrial automation mechanisms.

Developers of advanced electronics leverage these substrates to explore modern MEMS platforms, where the high piezoelectric effect translates to improved device performance in sensing and signal regulation. By integrating this substrate into civilian-focused applications, such as micro-manipulation tools and high-frequency resonators, innovators can develop more compact products that maintain longer service lives and lower energy consumption.