CY9399 PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol%

PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% Description

Our PIN-PMN-PT Single Crystal Substrate (111) at 30-34 mol% provides excellent piezoelectric and dielectric properties, making it usable for transducers, actuators, and sensors. The (111) orientation ensures effective polarisation characteristics, yielding enhanced sensitivity and stable performance across a wide range of frequencies. With precise dimensions of 5 × 10 × 0.5 mm, this substrate guarantees uniform thickness and crystalline quality for integration into device architectures.

Fabricated to meet stringent quality standards, our PIN-PMN-PT Single Crystal Substrate undergoes testing for structural integrity, compositional accuracy, and surface finish. Its reliability in industrial and research environments ensures long-term stability and repeatability. Invest in this substrate to harness the potential of advanced piezoelectric technology in applications requiring precision and consistency.

PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% Applications

PIN-PMN-PT Single Crystal Substrates (111) with 30-34 mol% composition exhibit excellent piezoelectric properties, high electromechanical coupling, and low dielectric loss. This combination leads to enhanced sensitivity, precision, and reliability, making them suitable for civilian applications. The uniform crystal structure improves signal clarity and energy efficiency, benefiting industries ranging from electronics and healthcare to research instrumentation.

1. Electronics and Semiconductor Applications

·         MEMS for accurate motion sensing and miniaturisation of devices

·         Sensor arrays for precise signal detection in consumer electronics

2. Medical and Healthcare Applications

·         Ultrasound transducers for imaging and diagnostic tools

·         Sensors for patient monitoring and therapeutic devices

3. Research and Scientific Instruments

·         Piezoelectric actuators for precision in scanning probe microscopy

·         Vibrational energy harvesting modules for laboratory settings

PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% Packaging

Each PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% is stored in an anti-static polyethylene pouch and placed in a foam-padded, moisture-resistant box. For optimal preservation and contamination prevention, store in a clean, low-humidity environment at room temperature. Clean gloves are recommended during handling. Custom packaging arrangements such as vacuum-sealed pouches or specialised labels are available upon request.

Packaging: Vacuum sealed, Wooden Box, or Customised.

PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% FAQs

Q1: What are the key material properties of PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol%?

A1: This PIN-PMN-PT Single Crystal Substrate (111) with a doping concentration of 30-34 mol% displays piezoelectric and ferroelectric properties, making it responsive to mechanical and electrical stimuli. Its (111) orientation enhances polarisation stability. Additionally, the material shows a high dielectric constant, low dielectric loss, and strong electromechanical coupling. These properties facilitate actuation, sensing, and energy conversion in commercial applications.

Q2: How should this product be handled and stored?

A2: Due to the crystal’s brittle nature, it should be handled with clean, lint-free gloves to prevent surface contamination and damage. Avoid excessive mechanical stress. Store in a protective container, ideally at moderate temperature and humidity. Minimising exposure to shock, vibration, and electrostatic discharge preserves the crystal's integrity and extends its operational lifespan.

Q3: Which quality standards and certifications apply to PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol%?

A3: Most manufacturers produce PIN-PMN-PT Single Crystal Substrates under an ISO 9001–accredited quality management system, ensuring product performance and traceability. They may also comply with RoHS and REACH directives, reflecting a commitment to reducing hazardous substances. Thorough inspections verify thickness tolerance, crystallographic orientation accuracy, and surface quality, meeting standards for commercial and industrial use.

Related Information

1. Manufacturing Process

Controlled thermal techniques are employed to produce the PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol%. Methods ensure a uniform crystal lattice throughout, allowing for stable piezoelectric and dielectric behaviour. During growth, high-purity ingredients are combined and subjected to temperature cycles, achieving desired stoichiometry and structural integrity. Cutting and polishing steps are performed meticulously, ensuring minimal surface defects for optimal performance in devices.

Care is taken at each stage of fabrication to preserve the crystal orientation and maintain dimensional requirements of 10x10x0.5 mm. Metrology tools verify crystalline quality, while polishing techniques minimise surface irregularities. Consistent monitoring of the 30-34 mol% doping ratio provides repeatable electromechanical characteristics, essential for modern applications, from sensing modules to transducer components.

2. Applications in Advanced Industries

Utilisation of the PIN-PMN-PT Single Crystal Substrate (111) 10x10x0.5 mm 30-34 mol% is seen in aerospace components, automotive sensor platforms, and consumer electronics. Its electromechanical coupling coefficient and low dielectric loss make it suitable for actuator systems and medical ultrasound equipment. The compact form factor of 10x10x0.5 mm suits designs, supporting trends towards miniaturisation in devices requiring sensitivity and robustness.

Technology companies rely on this substrate for imaging solutions, robotics innovations, and energy-harvesting modules. Research teams value the substrate’s performance for applications requiring precise motion control or high-resolution detection. By integrating the PIN-PMN-PT material, manufacturers can leverage its piezoelectric properties to exceed standard benchmarks in speed, resolution, and energy efficiency.