Discontinued (Discontinued) TM7282 Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm

Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm Description

Our Titanium Ingot (Ti Ingot) Grade 2, also known as TA2, offers a balance of strength, corrosion resistance, and formability. Measuring 350 mm in diameter and manufactured in compliance with ASTM B348 standards, this ingot is sought after for its reliability and consistent performance. Its resistance to oxidation and corrosion in acidic and seawater environments makes it suitable for various industries, including marine engineering, chemical processing, and aerospace applications.

Produced under strict quality controls, this Grade 2 titanium ingot ensures uniform composition and good weldability. Its strength-to-weight ratio allows for lighter, more efficient designs without compromising durability. Whether used for forging, machining, or further fabrication, our Titanium Ingot Grade 2 meets industry requirements and delivers a balance of performance and cost-effectiveness.

Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm Applications

The Grade 2 Titanium Ingot (TA2) with a diameter of 350 mm is known for its strength, corrosion resistance, and biocompatibility. This material is widely used in industries requiring lightweight yet durable components. Its properties make it essential for demanding applications, ensuring stability under extreme conditions. Below are three major categories of its applications.

1. Aerospace Applications

·        Aircraft Structural Components: Sections that improve efficiency and reduce fuel consumption.

·        Engine Parts: Resistant to extreme heat and corrosion, making them suitable for aircraft turbine environments.

2. Chemical Processing Applications

·        Corrosion-Resistant Tanks: To store and transport reactive chemicals without compromising structural integrity.

·        Heat Exchangers: To balance temperature while maintaining resistance against aggressive substances.

3. Marine Applications

·        Seawater Piping Systems: Resistant to saltwater corrosion, extending service life in ocean environments.

·        Offshore Platforms: Structural elements that withstand waves, winds, and saline conditions.

Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm Packaging

Each Titanium Ingot (Grade 2, TA2, Dia. 350 mm) is sealed in vacuum packaging to protect against moisture and contamination. Protective layers of corrosion-resistant paper and plastic film further ensure the ingot’s surface remains intact. Strong wooden crates safeguard against impact and damage during transport. Custom-sized packaging is available upon request to accommodate unique shipping and storage needs, ensuring a reliable delivery experience.

Packaging: Vacuum sealed, Wooden Box, or Customised.

Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm FAQs

Q1: What are the key material properties of Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm?

A1: Grade 2 titanium offers a balance of moderate tensile strength (around 345 MPa), high ductility, and excellent corrosion resistance. It has a low density of 4.51 g/cm³, providing a favourable strength-to-weight ratio. It maintains low levels of impurities such as oxygen and iron, ensuring consistent mechanical performance. Its high corrosion resistance results from a stable oxide layer, making it suitable for various industrial and chemical applications.

Q2: How can this titanium product be processed or fabricated?

A2: Titanium Ingot Grade 2 can be processed through methods, including forging, rolling, and extrusion. Preheating in a controlled atmosphere is often required due to titanium’s contamination affinity at high temperatures. Hot working temperatures typically range from 800°C to 950°C, allowing deformation. Post-processing steps, such as stress relieving or annealing, help optimise mechanical properties. Machining operations may require low cutting speeds and sufficient coolant to minimise tool wear.

Q3: Which quality standards and certifications apply to Titanium Ingot (Ti Ingot) Grade 2, TA2, Dia. 350 mm?

A3: Common industry specifications include ASTM B348 and ASTM B381 for titanium bars, forgings, and ingots. Additional certifications, such as ISO 9001, are often required to ensure consistent quality management across processing and manufacturing stages. Manufacturers conduct ultrasonic testing, chemical composition analysis, and mechanical property verification. Documentation of these evaluations, supported by third-party inspections or independent laboratories, demonstrates compliance with strict international standards and user requirements.

Related Information

1. Material Properties and Advantages

Titanium Grade 2 (TA2) ingots exhibit strong strength-to-weight ratios and corrosion resistance, making them desirable for engineering applications. The Dia. 350 mm size provides a stable and uniform structure, ensuring performance in industrial processes. Due to the chemical characteristics of Grade 2 titanium, this product is valuable in environments where reliability and efficiency are significant.

Manufacturers often choose Grade 2 titanium ingots for ductility, allowing easier forming and fabrication compared to other grades. When shaped as an ingot, the metal is suitable for subsequent processing methods like forging, rolling, or machining. These advantages translate to reduced material waste and streamlined production, making Grade 2 (TA2) ingots with a 350 mm diameter an economically viable choice for sectors such as aerospace, medical devices, and chemical processing.

2. Global Market Trends

Global demand for titanium ingots, specifically Grade 2 (TA2) variants with diameters up to 350 mm, has increased in recent years. Businesses across Asia, North America, and Europe are adopting these precision-engineered ingots to meet the requirements of advanced sectors, including aerospace and naval engineering. With rising investments in technologies, Grade 2 titanium ingots have become integral to manufacturing ecosystems worldwide.

As industrial applications broaden, the market for Dia. 350 mm TA2 ingots is projected to expand. Factors such as the push for lightweight yet durable materials, alongside an emphasis on sustainable production methods, have solidified the global appeal of titanium. By keeping pace with this momentum, producers are positioned to capitalise on growth opportunities while advancing innovation in titanium-based solutions.