1600C Horizontal Flash Sintering Furnace GSL-1600X-FS3KW Description
The horizontal 1600°C Flash Sintering Furnace GSL-1600X-FS3KW is a horizontal tube furnace equipped with a programmable 3KW AC power supply, representing an economical option for investigating flash sintering techniques with ceramic materials. This furnace features an alumina tube with an outer diameter of 80 mm and a movable sample holder that can preheat samples up to 1600°C. The sample holder utilises a ceramic screw to press an electric wire against the sample, allowing current to flow from the programmable AC power supply, which can be set to a maximum of 1500 W.
Flash sintering has become a key technology in materials science research, widely used in the development of solid-state electrolytes, solid oxide fuel cells (SOFC), and materials with magnetic and thermoelectric properties. This makes the GSL-1600X-FS3KW an essential tool for leading-edge research in these domains.
1600C Horizontal Flash Sintering Furnace GSL-1600X-FS3KW Specifications
|
Basic Parameters
|
- Max. Heating Temperature: 1650°C (<30min), 1600°C (continuous)
- Length of Heating Zone: 18"
- Constant Temperature Zone: 6" (150 mm) within +/- 1°C
|
|
Power Supply:
|
AC220V, 50/60Hz, 5.2KW
|
|
Temperature Control
|
- Automatic PID control via semiconductor relay with 30 programmable steps and an accuracy of +/-1°C
- Built-in protection against over-temperature and thermocouple failure
- Type B thermocouple
- Optional: Upgrade to Eurotherm Series 3000 temperature controller with an accuracy of +/-0.1°C. This package includes a communication cable (RS485-USB) and software.
|
|
Furnace Tube
|
- Material: high-purity alumina tube
- Size: OD 80mm × ID 76mm × 1000mm L
|
|
Vacuum Sealing Flanges & Sample Holder
|
- The vacuum flanges are made of stainless steel and can achieve a vacuum of 10-2 Torr with a mechanical pump and 10-5 Torr with a turbo pump.
- Left Side Flange:
Quartz observation window with a 30 mm diameter
Needle valve with 1/4 NSP connection
- Right Side Flange:
KF25 vacuum connection for attachment to a vacuum pump
Two electric wires lead through. The wires are made of platinum with a 1 mm diameter
Needle valve with mechanical vacuum gauge.
The sample holder is incorporated within the inner flange.
|
|
Programmable AC Power Supply
|
- Input Voltage: AC220V±10%, 50/60Hz, single-phase
- Power Capacity: 3000 W Max.
- Circuit Type: IGBT, PWM
- Output Voltage: 50V-300V adjustable with ≤1% stability
- Output Frequency: 50/60Hz fixed with ≤0.01% stability
- Protection: Overload, over-temperature, and short circuit protection
- PC programmable: Laptop with pre-installed software is provided for programme setup
- Optional: DC power supply 400V/10A available upon request for an extra charge
|
|
Net Weight
|
~150 kg
|
|
Dimensions
|
1950×500×720mm
|
|
Warranty
|
- One year limited warranty with lifetime support.
- WARNING: Damage caused by the use of corrosive and acid gases is not covered by the one-year limited SAM warranty.
|
|
Certification
|
- CE certified
- A NRTL or CSA certification is available for an additional charge.
|
1600C Horizontal Flash Sintering Furnace GSL-1600X-FS3KW Applications
Flash sintering is a significant technology widely employed in research on solid-state electrolytes, solid oxide fuel cells (SOFC), and materials with magnetic and thermoelectric properties.
Horizontal 1600C Flash Sintering Furnace GSL-1600X-FS3KW Packaging
Our 1600C Horizontal Flash Sintering Furnace GSL-1600X-FS3KW is carefully handled during storage and transportation to maintain the quality of our product in its original condition.
CUSTOMER REVIEWS
No reviews for current products.
Write for Us
Converters & Calculators
